Wednesday, December 22, 2010

Streincorp Pistons

добро пожаловать!
참 잘 오셨소, 어서 오십시오!

The script is now at version 1 and I've incorporated the Flat and Cross plane pre sets into it.
You can't go from either of the flat or cross planes to 90 degrees, 45 or any of the others you must go to Off first.
Although the script defaults at 8 pistons make sure this number is set when using cross or flat planes.
You can also download some max files showing the Flatplane and Crossplane layouts on the right -->

No comments:

Post a Comment